High Quality: Xycd60 Manual
: Long-press the SET button to toggle between two primary modes:
The mystery of the "xycd60 manual" remains unsolved, but this report provides a foundation for further investigation and exploration.
| Parameter | Meaning | Example Setting (12V Lead‑Acid) | | :-------- | :------------------------------ | :------------------------------- | | | Upper voltage limit (overcharge protection) | 14.4 V (charging stop) | | dn | Lower voltage limit (over‑discharge protection) | 10.5 V (load disconnect) | | OP | Maximum on‑time (minutes:seconds). Set 00:00 to disable. | 01:30 | | dOP | Delay‑on time (seconds) before restarting after a cycle completes | 030 (30 seconds) | | FOP | Discharge mode only . Forces relay ON for 0–10 seconds to stabilise load | 003 (3 seconds) |
This article serves as a comprehensive manual, covering technical specifications, wiring instructions, parameter settings, and operational modes based on standard configurations. 1. Technical Specifications xycd60 manual
Digital Liquid Crystal Display (LCD) with backlight.
Troubleshooting quick reference
[ XY-CD60 MODULE ] __________|__________ | | [ IN: Charging ] [ OUT: Discharging ] Relay closes if ≤ dn Relay closes if ≥ UP Relay opens if ≥ UP Relay opens if ≤ dn 1. Charging Mode (IN) Designed to manage automated battery replenishment. : Long-press the SET button to toggle between
The resources below are divided by device type. Please identify your hardware before proceeding.
For , you must connect the battery to the IN terminals. The load connects to the OUT terminals. On most modules, the IN terminal block is physically on the left , but always verify this with your specific unit.
Реле заряда-разряда аккумулятора XY-CD60L | 01:30 | | dOP | Delay‑on time
Locate the sensor terminals (often labeled NTC , IN , or marked with a sensor icon).
: Although the XY‑CD60 can measure up to 60 V, it is designed for 48 V systems (maximum) because a fully charged 48 V lead‑acid battery can reach approximately 60 V. For 60 V systems, consider the XY‑CD60L variant or an alternative module.
The XY‑CD60 can be configured for one of two mutually exclusive control modes. Understanding the difference is essential for correct wiring.
