Windows may cut power to save energy:
Plug the (70cm included) into the dock and your PC's USB 3.0 port. Wlx-893u3 Manual
When connected to a PC, the feature can trigger automated backups of specific folders. Windows may cut power to save energy: Plug
2.5 inch and 3.5 inch SATA I/II/III Hard Drives | Issue | Possible Cause | Troubleshooting Steps
USB 3.x docking station WLX-893U3 for 2.5_ and 3.5_ SATA and PATA (IDE) HDD (hard disk drives) - Free download as PDF File (.pdf),
Connects the device to the host computer.
| Issue | Possible Cause | Troubleshooting Steps | | :--- | :--- | :--- | | | USB connection, power, or drive initialization | 1. Try a different USB port and cable. 2. Ensure the power adapter is connected and the dock is powered on. 3. Open Disk Management ( diskmgmt.msc ). If the drive appears, assign a drive letter or initialize it. | | Slow transfer speed | Using USB 2.0 port, cable, or background processes | 1. Connect to a USB 3.0 (blue-colored) port on your computer. 2. Avoid using the front USB ports on a PC case. 3. Ensure no other heavy tasks are running. | | Offline Clone not working | Wrong slot, target drive too small, or button press | 1. Double-check your source and target drives are in the correct slots. 2. Ensure the target drive's capacity meets or exceeds the source's. 3. Perform the process again carefully. | | IDE drive not receiving power | Reported design flaw with the connector | Some users report that the IDE power connector doesn't make good contact. Try gently pressing the drive down or wiggling it while seated. | | Frequent disconnections / Data corruption | Unstable power supply or USB port | 1. Try a different power outlet. 2. Disconnect the USB hub to reduce power draw. 3. Some users have found the device to be generally unreliable under heavy load. |