Thyssenkrupp Levant Stair Lift Installation Manual Full !!install!! Jun 2026

Plug the transformer into the designated wall outlet. The LED indicator on the charger should light up, showing that power is active. Step 5: Mounting the Seat Assembly

Connect the power cable leads to the copper charging contacts. Ensure positive (+) and negative (-) terminals match the wiring schematic.

The ThyssenKrupp Levant stair lift is a straight stair lift designed to provide safe and easy access to multiple levels for people with mobility impairments. This manual provides a step-by-step guide for the installation of the Levant stair lift. thyssenkrupp levant stair lift installation manual full

Typically shipped in two or three segments depending on the ordered length, complete with splice joints.

The lift requires a standard electrical outlet to charge its batteries. 2. Unpacking and Preparing the Levant Stair Lift Plug the transformer into the designated wall outlet

Press the directional trailing edge covers on the carriage body. The lift must stop traveling in that direction.

Distribute the brackets evenly across the staircase. Ideally, place one bracket on the first step, one on the top step, and space the remaining brackets every 2 to 3 steps. Do screw the brackets into the stairs yet. Step 4: Position the Rail Push the rail assembly toward the wall. Ensure positive (+) and negative (-) terminals match

Mark the drilling holes through the mounting brackets onto the stair treads.

Slide the carriage unit onto the rail. Ensure the gear rack matches properly.