: Turn off the device. Hold the Recovery or Boot physical button on the board, then connect the USB cable to your PC. Release the button after two seconds.
A pink box in the UI indicates the device is in connected mode but needs to be switched to "Loader" using the "Switch" button in the tool. Safety Warning
RKDevTool only executes processes when the hardware is locked into a waiting state via USB OTG lines.
Excellent for legacy Rockchip boards; fewer "CRC errors" compared to experimental versions. rkdevtool v271 download work
: Versions below 5.0 often fail to recognize newer Rockchip devices. Radxa Docs currently recommends DriverAssistant v5.14 for stable USB burning. Physical Connection : You typically need a USB A-to-A data cable, depending on your board's OTG port. Device Mode : The device must be in Loader Mode (hold Recovery and power on) or Maskrom Mode
If an older driver version was previously installed, click first, reboot your computer, and then install the new driver.
Wait for the progress bar to reach 100%. The device will usually reboot automatically once finished. Troubleshooting Common Issues Device Not Found : Turn off the device
For compatible older chipsets, v2.71 is highly stable. It effectively manages "Download Image" and "Upgrade Firmware" tasks without the overhead of newer, more complex features. Ease of Use:
: Writes specific custom binaries to individual device partitions (e.g., flashing just boot.img or recovery.img ).
button while powering on or connecting via USB. This mode allows for firmware upgrades and individual partition flashing. Maskrom Mode A pink box in the UI indicates the
Wait for the confirmation dialogue box stating the drivers were successfully added to the system. Restart your computer to finalize the changes. Step 3: Setting Up RKDevTool v2.71
Open the extracted folder and double-click . Click the Install Driver button in the main interface.