While the installation process requires careful attention to detail—from preparing the right tools and drivers to properly configuring the flashing settings—the results are well worth the effort. The custom firmware unlocks capabilities you never knew your HG680-P possessed, extending the useful life of your hardware and providing a significantly better user experience than the stock firmware ever could.
If your HG680P is already running an unlocked/rooted Android firmware with terminal access, you can trigger the boot via software: Insert the MicroSD card or USB drive into the box.
While logged into the SSH terminal, look for the built-in installation script. In most RealUnix/Armbian variants, this script is initiated by typing: nand-sata-install Use code with caution. realunix pro hg680p install
This guide is for educational purposes only. Flashing custom firmware carries the risk of bricking your device. Proceed at your own risk. Backup your data before starting.
: Specifically noted as "Netflix fix" or compatible in recent revised versions. While the installation process requires careful attention to
Insert a non-metallic toothpick or pin into the AV jack until you feel a soft click. Hold it down.
:
A computer to prepare the microSD card. A USB keyboard and mouse (highly recommended for setup). The RealUnix Pro Image File specific to the HG680P. Flash Software: BalenaEtcher or Rufus. Step-by-Step Installation Guide Phase 1: Preparing the MicroSD Card Download the RealUnix Pro image file ( ) designed for the HG680P from a trusted source. Insert the microSD card into your computer. Open BalenaEtcher. Select the downloaded RealUnix Pro image. Select your microSD card as the target. Click Flash! and wait for the process to complete. Phase 2: Preparing the HG680P Power down your HG680P. Disconnect the power cable and any USB storage devices.