Extract the downloaded MediaTek USB VCOM Drivers zip file. Right-click the .inf driver file and select . Restart your computer to apply the changes. Step 2: Extract the Firmware
Download the SP Flash Tool (SmartPhone Flash Tool) for MediaTek devices. Use Original USB Cable: Ensure a stable connection. Download Oppo F1s MT6755 Firmware (A1601)
: The PC fails to recognize the phone. Reinstall the MTK VCOM drivers, try a different USB port (preferably USB 2.0), or use a different cable.
The Oppo F1s MT6755 is now a legacy device. Security patches ended in 2019. If you rely on this phone for banking or sensitive data, from unverified sources. Instead: Oppo F1s Mt6755 Firmware
Warning: Do select "Format All + Download" unless your device is completely hard-bricked, as this will erase your device's unique IMEI number and cause network signal loss.
The became the focus for a dedicated community of "flashers" and developers. Firmware—the "soul" of the device—was sought after for several critical reasons:
This guide focuses on the variant (often labeled F1s Plus or A1601 ), not the later Snapdragon models. Extract the downloaded MediaTek USB VCOM Drivers zip file
Firmware is not permanent; it can be updated or reinstalled through a process known as "flashing." Users often seek out the —a text file that tells flashing tools exactly where to place data on the phone's memory—to resolve issues like "boot loops" or a "dead" device.
The stock firmware allows you to restore your phone to its original factory state, fix software issues, or upgrade the system. When Do You Need to Flash Firmware? Bootloop: The device is stuck on the Oppo logo.
Install MediaTek USB VCOM Drivers on your computer to ensure the device is recognized. Step 2: Extract the Firmware Download the SP
: Available in 16GB, 32GB, or 64GB editions. Common Reasons for Flashing
How to Flash Oppo F1s (MT6755) Stock Firmware via SP Flash Tool Follow these steps carefully to flash your firmware:
Navigate to the extracted SP Flash Tool folder and launch flash_tool.exe as an administrator.
This indicates a connection issue. Change your USB port (use USB 2.0 instead of 3.0), try a different cable, or reinstall the VCOM drivers.
