Motorola Gm160 Programming Software -

CPS allows users to define frequency ranges (VHF 136–174 MHz or UHF 403–470 MHz), set power levels (25–45W), and customize the 14-character alphanumeric display.

Turn on the radio and ensure it is connected to a stable power source. Step 2: Configure the COM Port

Assign transmit (TX) and receive (RX) frequencies across channels.

The software will display a progress bar as it downloads the "codeplug" (the configuration file) from the radio. motorola gm160 programming software

The Motorola GM160 belongs to the Professional Radio series (often referred to as the Waris platform in certain regions). Unlike newer digital radios that use standard USB interfaces, legacy analog radios like the GM160 require specialized software and hardware to communicate with a computer. Key Capabilities of the Software

The software allows users to read the current configuration (codeplug) from the radio, modify settings, and write the new data back to the device. Key Functions of the CPS:

: Versions like CPS R06.10.04 are commonly used for this series. CPS allows users to define frequency ranges (VHF

Warning: If you get "Checksum Error" or "Communication Timeout," check your COM port settings (4800 baud, 8N1) and try slowing the CPU down again.

Connect the programming cable to your PC’s USB or serial port. Plug the RJ45 end into the GM160’s microphone port. Power on the radio. :

The radio will typically emit a confirmation beep and restart once the writing process successfully completes. ❌ Troubleshooting Common Connection Errors The software will display a progress bar as

Unlike modern DMR radios that use Bluetooth and drag-and-drop CPS, the GM160 belongs to the era of serial cables, greyed-out menus, and computers that run slower than a dial-up connection. Let’s break down how to actually get the software working without pulling your hair out.

These are the most common modern cables. They feature a built-in USB-to-Serial converter chip (such as FTDI or Prolific).

Click the "Write" icon (a computer with an arrow pointing to a radio).