Ldc101 Usb To Civ Driver Updated -

We tested the LDC101 cable on an Icom IC-7300 using WSJT-X v2.6.1 (FT8 mode). Here is the difference the updated driver makes:

The LDC101 is a hardware cable that contains a (typically a Prolific PL2303, Silicon Labs CP2102, or a clone variant). On one end, you have a USB-A connector for your PC. On the other end, a 3.5mm or 2.5mm mono plug that connects to your Icom radio’s REMOTE jack. ldc101 usb to civ driver updated

For more information, updates, and technical support, feel free to reach out to us through our website or social media channels. We're always here to help! We tested the LDC101 cable on an Icom

Ensure your software's CI-V address matches your radio's settings. On the other end, a 3

Choose and point it to the folder where you extracted the newly downloaded FTDI driver files.

| | Likely Cause | Solution | | :--- | :--- | :--- | | Error Code 10 | Counterfeit PL2303 chip | Use older v3.3.11.120 driver (unreliable) or buy a genuine USB-CIV adapter based on FT232R. | | COM port appears but no radio control | Wrong baud rate or CIV address | Check radio menu. Set software baud to match radio (e.g., IC-7300 = 115200 baud). | | Works for 5 minutes, then freezes | Driver power management | In Device Manager > Properties of COM port > Power Management > Uncheck "Allow computer to turn off this device." | | Driver installs but no port in Device Manager | Windows 11 security blocking unsigned drivers | Reboot into "Disable Driver Signature Enforcement" (Shift + Restart > Troubleshoot > Advanced > Startup Settings). |

To confirm the updated driver is successfully installed and functional, perform the following checks: