Locate the two battery release sliders on either side of the battery compartment. Slide both latches outward simultaneously.
Slide the latch to the release position while sliding the service door forward toward the front of the laptop. Lift the panel off and set it aside.
Before you start, a little preparation goes a long way in preventing damage and keeping your work organized. hp probook 450 g0 disassembly
Unplug the small 4-pin cooling fan power cable from the motherboard.
Every 12–18 months if used daily, or when fans are noisy and the bottom feels hot. Locate the two battery release sliders on either
Insert a thin plastic pry tool into the seam at the top edge of the keyboard (near the Esc, F-keys, and Delete keys). Gently pry upward to release the plastic retaining tabs.
Warning: This step is only necessary for motherboard repair, screen hinge repair, or replacing the cooling system/processor. Lift the panel off and set it aside
: You will need a small Phillips head screwdriver and potentially a plastic prying tool (spudger). Disassembly Steps
Before you start your , gather the following tools: