Close the Inlet and Outlet valves. Open the Bypass valve. 4. Step-by-Step Installation Procedure
Harvey HV3 Water Softener Installation Manual: The Ultimate Setup Guide
Proper salt management is essential for continued soft water production.
Before breaking into your plumbing line, ensure you have all the necessary components, tools, and the ideal installation location selected. Package Contents Harvey HV3 water softener unit
Ensure there is enough clearance above or in front of the unit to load block salt easily.
Locate your property's main stopcock (usually under the kitchen sink or near the water meter).
Test the hardness of your incoming unsoftened water using the test kit supplied with your unit. This reading is required for proper programming.
Follow this sequence for connecting the unit:
Before turning the water back on, double-check that all connections are tight and properly aligned. Pay special attention to the orientation of the bypass valve—it should be in the open position initially.
By following this comprehensive guide, you can ensure a successful installation of the Harvey HV3 water softener and start enjoying the benefits of soft water.
Keep the softener bypassed initially. Turn on the main stopcock and let a cold tap run for two minutes to clear any debris or copper filings introduced during the pipe cutting. 2. Pressurize the Softener Slowly open the on the bypass block.
Peak Spring © 2026
