: Press the MIDI/Add button, then press the Scene button (1–8) where you want to store it. All LEDs will flash to confirm. Exit : Press and hold Program again to save and exit. 4. Programming Chases To create a moving sequence: Enter Program Mode : Hold the Program button. Select Chase : Press one of the 6 Chase buttons.
Press a to choose the sequence to program.
Shows current scene, bank, chase, and fader values. Program Button: Activates Programming Mode. Music/Bank Copy Button: Toggles sound-to-light mode. 3. Initial Setup and Connections
Store custom lighting scenes and create animated chases. MIDI Compatibility: Synchronize lighting with music. disco 240 dmx controller manual
By following this comprehensive guide, you'll be able to unlock the full potential of your Disco 240 DMX controller and create stunning lighting effects for your events.
Press the Music/Bank button. Adjust sensitivity using the onboard microphone.
To get started with the Disco 240, follow these basic steps: : Press the MIDI/Add button, then press the
To ensure your controller lasts, the manual lists several crucial rules:
: Set each lighting fixture to a unique DMX starting address. For a standard 16-channel layout, Fixture 1 starts at 1, Fixture 2 at 17, and so on. Scene Creation Select the desired "Scanner" (fixture) button. Adjust the faders to set colors, positions, or patterns.
: Select a pre-saved SCENE . Press MIDI/ADD to add it to the sequence. Press a to choose the sequence to program
Tap the active Scanner button again to lock those values in place, allowing you to select and adjust a different fixture without altering the first one.
To program the Disco 240 DMX controller, follow these steps: