Daikin Brc1c51 61 Installation Manual

: Use the provided wood screws to fix the back plate to the wall. Do not over-tighten, as a deformed plate can prevent the upper casing from snapping back on correctly.

Strip approximately 3/8 inch (10 mm) of insulation from the wires. daikin brc1c51 61 installation manual

Determine your wiring trajectory. For rear-entry wiring, match the wall conduit with the central access cutout on the lower backplate. For surface-routed top-entry configurations, use a pair of side-cutters to clip away the thin, notched plastic knockout on the upper edge of the controller framing, removing all rough burrs. Step 3: Anchoring the Lower Case : Use the provided wood screws to fix

| Feature | BRC1C51 | BRC1C61 | |--------|---------|---------| | Backlit LCD | No | Yes (blue) | | DIP switches | No | Yes | | °C/°F switching | No (factory fixed) | Yes | | Weekly timer | Yes | Yes | | Control up to | 16 indoor units (with adapters) | 16 indoor units | Determine your wiring trajectory

(Main LCD unit with internal thermistor)

Follow these sequential steps to safely mount the BRC1C51/61 remote controller to a wall or electrical switch box. Step 1: Open the Controller Housing

Follow these steps to install your Daikin BRC1C51 61 thermostat: