Cerwin Vega At40 Specs ((better))
The is crucial. Do not place these against a wall. They need at least 12 inches of breathing room behind them. If you place them flush against a wall, the 38 Hz tuning will balloon to 55 Hz, resulting in boomy, one-note bass.
The AT-40 was part of the "AT" series, designed for enthusiasts who needed a loudspeaker capable of handling high power while maintaining, as the company touted, a clean sound. It was designed as a 3-way, full-range system intended primarily for home stereo use, though it had the efficiency and power handling to function well in large rooms or parties.
95 dB (1W/1m), making them very efficient and easy to drive with low-power amplifiers Nominal Impedance: 6 Ohms Crossover Frequencies: 400 Hz and 3,000 Hz
The original red foam surrounds are prone to "foam rot" over decades. If they look crumbly or have tears, they must be replaced. Luckily, AT-40 re-foam kits are inexpensive and widely available online for DIY restoration. cerwin vega at40 specs
Sitting near the top of this legendary lineup is the Cerwin-Vega AT-40. This article delivers an in-depth breakdown of the Cerwin-Vega AT-40 specs, its design philosophy, cabinet construction, and what to look for if you are hunting for a pair on the vintage market today. The Heritage of the Cerwin-Vega AT Series
is a legendary member of the series, a lineup that epitomized the brand's reputation for high-efficiency, "party-ready" sound in the late 1980s and early 1990s. Known for their punchy bass and signature orange surround, these speakers were designed to deliver high sound pressure levels (SPL) even when paired with modest amplifiers. Technical Specifications Go to product viewer dialog for this item.
Unlike the iconic orange-surround woofers of the later DX/V series, the AT-40 uses a black butyl rubber surround. This is a clue: CV wanted tighter bass, not just boom. The cast polymer frame reduces ringing. The voice coil is a 1.5" high-temperature Kapton former. This woofer is punchy, not sloppy, but it requires clean power. The is crucial
The Cerwin-Vega AT-40 is a legendary loudspeaker from the late 1980s and early 1990s, revered by audiophiles and party hosts alike. Known for their massive soundstages, high efficiency, and unmistakable red-surround woofers, these vintage towers remain highly sought after in the secondary audio market.
Woodgrain vinyl veneer over high-density particleboard/MDF Drivers (Speaker Components) Configuration: 3-Way Loudspeaker System
features a 10-inch low-frequency woofer utilizing a cast or stamped frame, mated to a dedicated midrange cone and a high-frequency dome tweeter. The cross-over splits the frequencies at 400 Hz and 3,000 Hz, ensuring that vocal ranges stay isolated from deep bass modulations. If you place them flush against a wall,
Known for their robust, furniture-style presence, these speakers are relatively manageable compared to the massive Cerwin-Vega AT-15 . Approximately
is not designed for that market. Instead, it is engineered for .
